Hi-Target Gnss Rtk System V30S/ V30ST

Hi-Target Gnss Rtk System GNSS Receivers for Surveying 1. International Advanced Trimble BD970 motherboard, Multi-Satellite, Multi-system kernel 2. Built-in Transmit-Receive UHF, Exchangeable Base and Rover 3. 1+ X Multi-Module Communication Units 4. Configured with PCC radio, Compatible to Co-work with RTK ceceivers of Trimble, Leica ect. 5. Syoer kibg dustabce exterbak radui radio optional 6. Fully strongest waterproof, dustproof, broken-resistant 7. With intelligentialized self-diagnosis function 8. Double battery capacity, with 4400mAh capacity for a single battery 9. Config Multi-function RTK controller iHand Series 1. Voice navigation of RTK handhel software GNSS satellites tracked: Galileo ( y/ n/ upgrade) Upgrade Glonass ( y/ n/ upgrade) Yes GPS ( y/ n/ upgrade) Yes Compass ( y/ n/ upgrade) Upgrade Multi frequency RTK capable ( y/ n) Yes DGPS: WAAS/ EGNOS ( y/ n) Yes Beacon ( y/ n) No External RTCM ( y/ n) Yes Accuracy: RTK horizontal ( mm+ ppm) ± 10mm+ 1ppm RTK vertical ( mm+ ppm) ± 20mm+ 1ppm Static horizontal ( mm+ ppm) ± 2.5mm+ 1ppm Static vertical ( mm+ ppm) ± 5mm+ 1ppm Operational techniques: Stop/ go kinematic ( y/ n) yes Rapid-static GPS ( y/ n) yes Full static ( y/ n) yes RTK transmit ( y/ n) yes RTK receive ( y/ n) yes RTK installation time: 5-sat nav and corrections available ( s) < 10 s Minimum data capture rate ( s) our software only support 1 HZ but our mainboard can support to 10HZ Receiver dimensions ( mm) Æ 195mm× 104mm Antenna dimensions ( mm) Controller; internal or external ( i/ e) : External Weight ( kg) 1.3KG with Battary Input voltage ( v) DC 6-36 V Power consumption ( w) 2.5 w Battery type Lithium in 4400mAh Antenna; integrated or external ( i/ e) integrated